VA20-NO, with actuator normally open
The 2-port valve RESOL VA20 is used for switching flow rates in solar, heating and air conditioning systems. The VA20 is a 2-port-valve with an electrothermal actuator. The actuating time of approx. 3 minutes enables a flow rate regulation without water hammers. The VA20 comes with brass connection fittings.
Power supply: 230 V~, 50 – 60 Hz
Power consumption: 1 W
Max. switching voltage: max. 550 mA
Ingress protection: IP 54
Protection class: II
Pollution degree: 2
Spring force: 100 N
Stroke: 4 mm
Maximum operation temperature: 0 – 60 °C
Actuation time: ca. 3.5 min
Electrical connection: 2 x 0.75 mm²; 100 cm
Power consumption: 4,3 mA
Initial position: NC: normally closed
NO: normally open
Valve
Maximum pressure: 10 bar
Housing: corrosion resistant red brass
Internal parts: brass and stainless steel
Sealings: EPDM
Connections: 1/2″, 3/4″, 1″ and 11/4″
Temperature range: temperature resistant up to +120 °C, for a short term up to +140 °C
VA20-NO/DN 15 R½”, with actuator normally open
VA20-NO/DN 20 R¾”, with actuator normally open
VA20 -NO/DN 32 R1¼”, with actuator normally open
VA20-DN32 – R1¼”, with actuator
VA20-NC/DN 15 R½”, with actuator normally closed
VA20-NC/DN 20 R¾”, with actuator normally closed
VA20-NC/DN 25 R1″, with actuator normally closed
VA20-NC/DN 32 R1¼”, with actuator normally closed
