14 relay outputs and 12 inputs for Pt1000, Pt500 or KTY temperature sensorsUp to 5 extension modules via RESOL VBus® (45 sensors and 39 relays in total)
Inputs for analogue and digital Grundfos Direct Sensors™ as well as for FRH and FRHd humidity sensors
Integrated control of up to 4 high-efficiency pumps via PWM outputs
Data logging, storing, easy transfer of controller adjustments prepared and firmware updates via SD card
Cooling over the heating circuit with condensation detection by means of a dew point switch
Dew point calculation by means of the FRH(d) humidity sensor to avoid condensation
Simplified timer, 0-10 V boiler control and DHW preheating
The DeltaSol® MX is the most versatile system controller for complex solar and heating systems in our product range. It is ideal to control a combination of solar and non-solar parts of the system. Easy combination and parameterisation of pre-programmed functions for several millions of hydraulic variants.
Inputs: 12 Pt1000, Pt500 or KTY temperature sensor inputs (can optionally be used for remote controls, operating mode switches or potential-free switches), 3 impulse inputs for V40 flowmeters, 1 input for a FlowRotor, 1 CS10 solar cell, 2 analogue inputs for VFS/RPS Grundfos Direct Sensors™ or FRH humidity sensors, 2 digital inputs* for VFD/RPD Grundfos Direct Sensors™ or FRHd humidity sensors
* For the Inputs Gd1 and Gd2, the following sensor combinations are possible: 1 x RPD, 1 x VFD / 2 x VFD, but with different measuring ranges only / 1 x VFD, 1 x FRHd / 1 x RPD, 1 x FRHd
Outputs: 14 relays, 13 of them semiconductor relays for pump speed control, 1 potential-free relay and 4 PWM outputs (convertible to 0-10 V signal outputs)
PWM frequency: 512 Hz
PWM voltage: 10.5 V
Switching capacity:
1 (1) A 240 V~ (semiconductor relay)
4 (1) A 24 V DC/ 240 V~ (potential-free relay)
Total switching capacity: 6.3 A 240 V~
Power supply: 100 – 240 V~ (50 – 60 Hz)
Supply connection: type X attachment
Standby: 0,84 W
Temperature controls class: IV
Energy efficiency contribution: 5 %
Mode of operation: type 1.B.C.Y. action
Rated impulse voltage: 2.5 kV
Data interface: RESOL VBus®
VBus® current supply: 35 mA
Functions: solar system controller for use in solar and heating systems. 7 integrated calorimeters and control of weather-compensated heating circuits. Adjustable system parameters and add-on options (menu-driven), balance and diagnostics functions, function control according to VDI 2169
Housing: plastic, PC-ABS and PMMA
Mounting: wall mounting, mounting into patch panels is possible
Indication/Display: full graphic display, control lamp (directional pad) and background illumination
Operation: 7 push buttons at the front
Ingress protection: IP 20 / IEC 60529
Protection class: I
Ambient temperature: 0 … 40 °C
Pollution degree: 2
Dimensions: 253 × 200 × 47 mm
Maximum altitude: 2000 m above MSL
Fuse: T6,3A
