All type of cement
Long workability concretes
Ready-mix concrete
High performance concrete
Plastic or fluid concretes
Concrete for paving in hot climates
New generation super-fluidifying additive based on modified
polycarboxylates, particularly recommended for specific for screeds,
lowered screeds, ready-mix concrete and civil construction sites. It
is intended to create a strong reduction of water (> 20 %) and/or an
increase in the workability of concrete. It allows to make concrete with
a long workability retention without counterproductive setting delays.
Its use is particularly indicated for realization durable works in relation
to the prescriptions and exposure classes required by the UNI EN 206
standard
Conformity
In accordance with UNI EN 934-2:2012 and UNI EN 934-3:2012.
Doses
The recommended dosage range is between 0.8 and 1.2% on the weight of the cement in relation to the desired
workability. Higher dosages allow the production of superfluid concrete with very high mechanical strength with a / c
ratios lower than 0.4. In case of SCC concrete, the dosages indicated above must be related to the quantity of powders
(cement, fly ash or filler, passing through the sieve aggregates 0.125 mm).
The maximum effectiveness of the additive is determined after on-site tests, taking into account the rheological
characteristics and the mechanical strength required for the concrete.
Appearance: liquid
Colour: colour amber
Effective component: polycarboxylate ether
Miscibility: in water, in all relation
Density at 20 °C: 1,04 ± 0,02 g/cm3
pH at 20 °C: 7,0 ± 0,5
Dry leftover: 15 ± 0,5 %
Chloride content: < 0,10 %
Equivalent alkali content: < 3 %
Operating temperature: from +1 °C
