Industrial water supply & transfer
Compact, reliable, vertical, multistage centrifugal pump with radial suction and discharge port. The shaft, impellers
and chambers are made of stainless steel. The inlet and discharge parts are made of cast iron. The mechanical shaft
seal is a special designed, unbalanced O-ring seal. Pipework connection is via internal Whitworth pipe threads, Rp
(ISO 7/1).
Further product details
The state-of-the-art design and materials of the shaft seal ensure high wear resistance, improved sticking and
dry-running capabilities and long operating life.
Servicing the pump requires no special service tools. Service parts are in stock for quick delivery and are available as
kits, single parts or bulk. Service videos are available on www.youtube.com.
Pump
A combination of a stop ring and a Nord-lock® washer secures a tight and reliable fixation of the impeller spacing
pipes to the splined pump shaft. It is possible to remove and fit the hydraulic parts from the pump side. The inlet part,
chambers and discharge part are hold together by four staybolts.
The pump is fitted with an unbalanced O-ring seal with a rigid torque-transmission system. It has a fixed seal driver
ensuring a reliable rotation of all parts. The dynamic secondary seal is an O-ring.
Seal faces:
• Rotating seal ring material: aluminium oxide (alumina)
• Stationary seat material: carbon graphite, resin-impregnated
Carbon graphite against alumina is a good all-round seal for not too demanding applications. The corrosion
resistance is often limited in water to a range between pH 5 and pH 10. Usage in liquids above 90 °C is not
recommended. The seal can handle dry-running conditions for short periods.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
The pump shaft is connected to the motor shaft through a left thread and tight fit. The shaft cannot be dismantled.
Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to EN 50347. Electrical tolerances comply
with EN 60034.
General information:
Product name: CMV5-6 A-R-A-E-AVBE
Product No: 97908649
EAN number: 5710626199570
Technical:
Pump speed on which pump data are
based:
2900 rpm
Rated flow: 4.7 m³/h
Rated head: 46.5 m
Impellers: 6
Primary shaft seal: AVBE
Approvals: CE,ACS,TR,EAC
Curve tolerance: ISO9906:2012 3B
Pump version: A
Model: A
Materials:
Pump housing: Cast iron
Pump housing: EN-JL1030
Pump housing: ASTM 30 B
Impeller: Stainless steel
Impeller: DIN W.-Nr. 1.4301
Impeller: AISI 304
Material code: A
Rubber: EPDM
Code for rubber: E
Installation:
Maximum ambient temperature: 55 °C
Maximum operating pressure: 10 bar
Max pressure at stated temp: 6 bar / 90 °C
Max pressure at stated temp: 10 bar / 40 °C
Flange standard: WHITWORTH THREAD
RP
Pump inlet: RP 1 1/4
Pump outlet: RP 1
Connect code: R
Liquid:
Pumped liquid: Water
Liquid temperature range: -20 .. 90 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³
Electrical data:
Rated power – P2: 1.3 kW
Mains frequency: 50 Hz
Rated voltage: 1 x 220-240 V
Service factor: 1
Rated current: 8.72-8.1 A
Rated speed: 2710-2760 rpm
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Built-in motor protection: TP211
Others:
Minimum efficiency index, MEI ≥: 0.7
Net weight: 23.8 kg
Gross weight: 26.4 kg
