Grundfos Fire system Hydro EN 40-250/250 S2JS ADL-U1

Pressure booster pump sets are designed for automatic sprinkler systems, according to EN 12845, in addition to
other relevant industry standards.
The pumps sets are designed for fire extinguishing systems with clean water and for single or combined water
supplies. It is compact, robust and modular system supplied in pre-assembled macro blocks to make transport,
handling and installation easy. Communication is guaranteed through ModBus module.
The main pumps have end-suction hydraulics. They are fitted with corrosion-resistant material and replaceable
wearing parts, back pull-out design through spacer coupling, fitted with high grade mechanical seals and internally
tested at the factory according to QCP protocols.
The pump is equipped with IEC squirrel cage electric motor IE3 up to 55kW and IE4 from 75kW and upwards that
delivers, in continuous operation, at least the power required at the flow corresponding to the NPSHr value equal to
16 m.
The hydraulic components are designed to minimize the pressure loss and the water speed to meet the requirements
at the flow rate values stated on the performance curve.
The system contains the following components (unless otherwise specified):
• Two hydraulics coupled with drivers
Two microprocessor-based control panels
One pressure maintenance pump and related independent control panel
One modular discharge manifold
Two concentric tapered adapters
Two grooved joints
Direct connection port for room sprinkler
Two non-return valves
Two isolating valves
Two drain test valves
Two pump starting assembly pack (two pressure switches, glycerin-filled pressure
gauge, isolating valve, bypass line with non-return valve and drain valve)
Two pressure sensing switches (pump running)
Pressure vessel
A set of Jockey pump fittings (connection for priming, non-return valve, two isolating
valves and a pressure switch).
For more components, contact Grundfos.
The two main pumps are configured in a duty / stand-by configuration.
Each pumping unit is mounted on a separate baseplate to reduce stress from one unit to the other while assuring
layout flexibility. This layout ensures easy access to the narrow pump room entry and handling in case of
extraordinary maintenance needs and keeps the system protected.
All the items are wired and fitted at the factory within the same unit skid, except for larger main control panels that are
supplied loose with proper signals and cable entry tags.
Pump, driver, jockey pump and controllers (unless large size) are anchored on a robust electro-welded baseplate.
They are painted RAL 3000 and designed to withstand all static and dynamic stress.
The baseplates are designed with holes and anchoring lugs for an easy and safe handling ensuring optimal fastening
to the plinth or concrete foundation.